Installation - Jøtul F 105 R Instrucciones Para Instalación

4.0 Installation

NB: Check that the fireplace is undamaged before installation
begins.
NB: The product is heavy! Ensure you have help when
positioning and installing it. Make sure the product does
not topple over.
NB: Do not place anything on the top plate of the stove as this
could cause permanent damage to the paint.
NB: Read the Installation and Operating instructions carefully
before installing the fireplace!
4.1 Prior to installation - Jøtul F 105
with long legs
Fig. 3
B
A
1. Remove the two transport screws (A) that fasten the stove
to the wooden pallet.
2. Leave the stove standing on the transport pallet.
3. Take out the glove, bag of screws, external air connector
and adapter lying in the burn chamber.
4. Check that the control lever (B) moves easily.
A
Fig. 4
A
5. Lift the stove from the pallet.
6. Set up the stove and adjust using a cap wrench to a
horizontal position with the 4 height adjustment screws.
Mark on the wall if there has to be a rear outlet for flue pipe
and external air supply. NB: Take into account the height
of the floor plate.
ENGLISH
A
13