Britax ADVOCATE CLICKTIGHT Guia Del Usuario página 38

Britax Child Safety, Inc.
Replacing the Cover
1. Attach one side of the
upper shell cover at the
forward-facing belt path,
pull the cover over the
back of the shell, and
secure at opposite belt
path.
2. Replace lower shell cover.
a. Open the
CLICKTIGHT.
b. Tuck one of the plastic
tabs on the lower
shell cover into the
outer side of the shell
between the forward
and rear-facing belt
paths.
c. Tuck the lower shell
cover around the inner
and outer sides of the
shell from the forward-
facing belt paths to the
front of the child seat.
d. Continue replacing
the lower shell cover
around the seat to the
other forward-facing
belt path and tuck the
second plastic tab
into the shell between
the forward and rear-
facing belt paths.
IMPORTANT:
Ensure shell cover is
secured behind red
markers to allow for
proper function of
CLICKTIGHT.
e. Thread the harness
adjuster strap through
the front of the lower
shell cover.
36
2a
2b
2c
2d
2e