Machine Operating Buttons; Start/Stop Button; Up/Down Needle Button; Speed Control Lever - Janome MS 5027 Pink ribbon Manual De Instrucciones

Machine Operating Buttons

q Start/stop button
w Up/down needle button
e Speed control lever

Start/stop Button

q Start/stop button
Press the button to start or stop the machine. The machine
starts running slowly for the first few stitches; it then runs at
the speed set by the speed control lever.
NOTE:
The Start/stop button cannot be used when the foot
control is connected to the machine.

Up/down Needle Button

w Up/down needle button
Press this button to bring the needle up or down.
You can set the needle position with this button, up or down
when the machine stops.

Speed Control Lever

e Speed control lever
Sewing speed can be varied by the speed control lever
according to your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.
q w
8
e