Cleaning The Shuttle Race And Feed Dogs; Oiling The Machine - Janome MS 5027 Pink ribbon Manual De Instrucciones

Cleaning the Shuttle Race and Feed Dogs

1 Unplug the machine and remove the presser foot and
needle. Open the face cover to allow room to remove the
needle plate screw with a screwdriver. Remove the needle
plate and take out the bobbin.
1
1 Needle plate
Lift up the bobbin holder
2
Bobbin holder
2
3 Brush out dust and lint inside the bobbin holder. Clean
the feed dogs and hook race
3
out gently with a soft, dry cloth.
3 Feed dogs
Hook race
4
Line up the triangle marks
4
holder, so that the notch fits next to the stopper
hook race.
5 Line up the triangle marks.
The notch fits next to the stopper.
6

Oiling the Machine

Unplug the machine. Open the face cover and oil the two
points, as shown, at least once a year. One or two drops of
oil is sufficient. Remove excess oil, otherwise it may stain the
fabric. In case the machine has not been used for a long
period, oil it before sewing. Use quality sewing machine oil.
and remove it.
2
with a lint brush. Wipe
4
and position the bobbin
5
6
1
1
2
3
4
in the
100
3
5
2
4
6