Putting On The Helmet; Taking Off The Helmet 85 J - SCHUBERTH C3 pro Manual De Usuario

Ocultar thumbs Ver también para C3 pro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

D. PUTTING THE HELMET ON AND
TAKING IT OFF
Note:
Please note the information on the handling of the chin strap.

1. PUTTING ON THE HELMET

1. Open and lock the chin bar. Make sure the sun visor is retracted into
the helmet shell.
2. Open the chinstrap and chinstrap comfort pad.
3. Pull apart the lower ends of the chinstrap.
4. It will now be easy to put the helmet on.
5. Close the chinstrap comfort pad (with the Velcro fastener).
6. Fasten the chinstrap.
7. Make sure the chinstrap passes under the chin and fits snugly.
8. Swing the chin bar down until you hear both locks close.
9. Check that the chin section is securely locked by pressing it up from
below.
Caution:
Never ride with the chin bar raised!
84
2. TAKING OFF THE HELMET
1. Open and lock the chin bar. Make sure the sun visor is retracted into
the helmet shell.
2. Open the chinstrap.
3. Undo the Velcro of the chinstrap comfort pad.
4. Grasp the ends of the chinstrap and pull the chinstrap ends apart.
5. The helmet can now be removed easily from the head.
6. Close the chin bar.
Tip:
To avoid scratching any objects you might place the helmet on, we
recommend closing the chin-strap after you have taken the helmet off.
EN
85

Publicidad

Tabla de contenido
loading

Tabla de contenido