Husqvarna 390 XP Manual Del Usuario página 36

Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain. A
Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
H42 5.5 mm / 7/32 in
H48 5.5 mm / 7/32 in
H81 5.5 mm / 7/32 in
C85, C83 5.5 mm / 7/32 in
36
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
0.025 in / 0.65
505 24 35-01
0.025 in / 0.65
505 24 35-01
0.025 in / 0.65
0.025 in / 0.65
586 93 85-01
25°
mm
25°
mm
25°
mm
30°
mm
55°
55°
55°
60°
590 - 001 - 13.01.2020