How To Mounting Your Switch Cup Cover Assembly (For Ma4660) - Fanimation ZONIX MA4660 Serie Manual

How to Mounting Your Switch Cup Cover Assembly (for MA4660)

1. Remove the switch cover from the switch cup
cover assembly by twisting in a counterclockwise
direction. Retain the switch cover for Step 6.
(Figure 1)
2. Remove one of the three screws in the support-
cover switch cup and retain the screw for Step 5.
Slightly loosen the remaining two screws and remove
the inner-switch cup. Retain the inner-switch cup for
reassembly in Step 5. (Figure 2)
3. Remove the three screws in the support bracket at
the bottom of motor assembly and retain the screws
for later. (Figure 3)
4. Attach the support-cover switch cup to the support
flange using the previously removed three screws
and fully tighten. (Figure 4)
5. Assemble the inner-switch cup to the support-cover
switch cup using the two key slots in the inner-switch
cup. Replace the previously removed screw and
securely tighten all three screws. (Figure 5)
All manuals and user guides at all-guides.com
Switch Cup Cover
Assembly
Motor Assembly
12
Figure 1
Inner-Switch Cup
Figure 2
Motor Assembly
Figure 3
Support-Cover
Switch Cup
Figure 4
Support-Cover
Switch Cup
Inner-Switch Cup
Figure 5
Switch Cover
Support-Cover
Switch Cup