Causes And Rectification Of Faults - Caso MCG 30 Manual Del Usuario

15.3 Causes and rectification of faults

The following table assists in localizing and rectifying minor faults
Error
The selected
program will not
start.
The turntable turns
jerkily.
Food is not
sufficiently
defrosted, warmed
up or cooked after
preset time has
elapsed.
The device
functions but the
cooking chamber
lighting does not
work.
Abnormal noises
can be heard during
operation of
microwave.
The time in the
display field is not
correct.
Attention
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
caso MCG30 Chef (pure white, black)
Possible cause
Device door is not closed
Power plug is not plugged
in
Fuse is not activated
Dirt between the turntable
and the base of cooking
camber
Dirt on rolling ring
Cooking vessel too large
Incorrectly selected time or
power level
Defective cooking chamber
light.
Food is covered with
aluminium foil
The cookware contains
metal and sparks are being
created within the cooking
chamber
Power failure
Action
Close device door
Plug in mains plug!
Activate fuse
Remove dirt
Use different cooking vessel
Re-set time and power level
Repeat process
Have Service dept repair cooking
chamber light.
Remove aluminium foil
Observe information on cookware!
Re-set time
70