Additional Information; Specifications - Sony HT-ST5000 Manual De Instrucciones

Additional Information

Specifications

Bar Speaker (SA-ST5000)
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 6 ohms loads, both channels
driven, from 200 - 6,000 Hz; rated
20 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
Front tweeter L + Front tweeter R:
With 6 ohms loads, both channels
driven, from 6,000 - 20,000 Hz; rated
20 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W
(per channel at 6 ohms, 1 kHz)
Front tweeter L/Front tweeter R
speaker blocks: 50 W (per channel at
6 ohms, 10 kHz)
Center speaker block: 50 W (per
channel at 6 ohms, 1 kHz)
Center tweeter speaker block: 50 W
(per channel at 6 ohms, 10 kHz)
Top speaker block: 50 W (per channel
at 6 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 30 W + 30 W
(at 6 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W
(per channel at 6 ohms, 1 kHz)
Front tweeter L/Front tweeter R
speaker blocks: 50 W (per channel at
6 ohms, 10 kHz)
Center speaker block: 50 W (per
channel at 6 ohms, 1 kHz)
Center tweeter speaker block: 50 W
70
US
(per channel at 6 ohms, 10 kHz)
Top speaker block: 50 W (per channel
at 6 ohms, 1 kHz)
Inputs
HDMI IN 1/2/3*
ANALOG IN
TV IN (OPT)
Outputs
HDMI OUT (TV (ARC))*
* HDMI IN 1/2/3 and HDMI OUT (TV (ARC))
jacks support HDCP 2.2 protocol. HDCP
2.2 is newly enhanced copyright
protection technology that is used to
protect content such as 4K movies.
HDMI Section
Connector
Type A (19pin)
USB section
(USB) port:
Type A (For connecting USB memory)
LAN section
LAN(100) terminal
100BASE-TX Terminal
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.1
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 30 m
Maximum number of devices to be
registered
9 devices
Frequency band
2.4 GHz band (2.4 GHz - 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.5 (Audio Video Remote
Control Profile)
3)
Supported Codecs
4) 5)
SBC , AAC , LDAC
1)
2)