Sony HT-ST5000 Manual De Instrucciones página 57

• [Standby Through] (page 51)
This function is available when you set
[Control for HDMI] to [On].
[Auto]
: Signals are output from the
HDMI OUT (ARC)
system's
the TV is turned on while the system is
not turned on. The system standby
power consumption can be reduced
more than when set to [
On ]: Signals are always output from
[
HDMI OUT (ARC)
the system's
when the system is not turned on. If
you connect a TV other than those
manufactured by Sony, we
recommend that you select this
setting.
Off
[ ]: Signals are not output from the
HDMI OUT (ARC)
system's
the system is not turned on. Turn on
the system to enjoy on the TV content
of a device connected to the system.
The system standby power
consumption can be reduced more
than when set to [
• [TV Audio Input Mode] (page 51)
Set this function when the system is
connected to a TV's HDMI IN jack that
is compatible with Audio Return
Channel. The Audio Return Channel
function is available when you set
[Control for HDMI] to [On].
[Auto]: You can listen to TV sound
from the speakers of the system.
[Optical]: Use this setting when an
optical digital cable is connected.
• [HDMI Signal Format]
You can select the HDMI signal format
for the input signal. For details, see
"Setting the HDMI Signal Format to
Watch 4K Video Content" (page 19).
[Quick Start/Network Standby]
[On]: Shortens the startup time from
standby mode. You can operate the
system quickly after turning it on.
[Off]: Off
jack when
On
].
jack
jack when
On
].
[Auto Standby]
[On]: Turns on the [Auto Standby]
function. When you do not operate the
system for about 20 minutes, the
system enters standby mode
automatically.
[Off]: Off
[Software Update Notification]
[On]: Sets the system to inform you of
latest software version information
(page 54).
[Off]: Off
[Auto Update Settings]
• [Auto Update]
[On]: Software update is automatically
executed between 2 a.m. and 5 a.m.
local time in the selected [Time Zone]
while this system is not in use. If you
select [Off] in [Quick Start/Network
Standby], software update is
performed after you turn off the
system.
[Off]: Off
• [Time Zone]
Select your country/region.
Notes
• Software update may be performed even
if you select [Off] in [Auto Update]
depending on the details of the updates.
• Software update is performed
automatically within 11 days of a new
software release.
[Device Name]
You can change the name of this system
according to your preference so that it is
more recognizable when using the
[Bluetooth Audio] function. The name is
also used with other networks, such as
the home network. Follow on-screen
instructions and use the software
keyboard to enter the name.
57
US