Sony HT-ST5000 Manual De Instrucciones página 67

Ocultar thumbs Ver también para HT-ST5000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Wireless LAN Connection
You cannot connect your PC to the
Internet after [Wi-Fi Protected
Setup™ (WPS)] is performed.
 The wireless settings of the router
may change automatically if you use
the Wi-Fi Protected Setup function
before adjusting the settings of the
router. In this case, change the
wireless settings of your PC
accordingly.
The system cannot connect to the
network or the network connection
is unstable.
 Make sure the wireless LAN router is
on.
 Check the network connection
(page 21) and the network settings
(page 58).
 Depending on the usage
environment (including the wall
material), radio wave reception
conditions, or obstacles between the
system and the wireless LAN router,
the possible communication distance
may be shortened. Move the system
and the wireless LAN router closer to
each other.
 Devices that use a 2.4 GHz frequency
band, such as a microwave,
BLUETOOTH, or digital cordless
device, may interrupt
communication. Move the main unit
away from such devices, or turn off
such devices.
 The wireless LAN connection may be
unstable depending on the usage
environment, especially while using
the BLUETOOTH function of the
system. In this case, adjust the usage
environment.
The wireless LAN router you want is
not shown in the wireless network
list.
 Press BACK to return to the previous
screen, and try [Wireless Setup] again
(page 21). If the wireless LAN router
you want is still not detected, select
[New connection registration] from
the network list, then select [Manual
registration] to input a network name
(SSID) manually.
Internet Connection
You cannot connect the system to
the Internet.
 Check the wired or wireless LAN
connection.
 Restart the router or wireless LAN
router.
Wireless Multi Room
The sound is delayed behind the
picture.
 When the sound of the [TV], [HDMI1],
[HDMI2], [HDMI3], or [Analog] input is
played in the wireless multi room
function, the sound is delayed behind
the picture. This function is for
enjoying the sound of the device that
is connected to the system in
different rooms. If you are bothered
by a time gap between the sound and
picture, cancel the wireless multi
room function.
The wireless multi room function
cannot be used on Sony | Music
Center.
 Connect the mobile device to the
same network as that of the system.
67
US

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido