Bushnell TROPHY 119774 Manual De Instrucciones página 5

INTRODUCTION
About the Trophy Cam HD Aggressor
The Bushnell Trophy Cam HD Aggressor is a digital scouting camera. It
can be triggered by any movement of game in a location, detected by a highly
sensitive Passive Infra-Red (PIR) motion sensor, and then take high quality
pictures (up to 14MP still photos), or video clips.
The Trophy Cam HD Aggressor consumes very little power (less than
0.25 mA) in a stand-by (surveillance) state. This means it can deliver up to
six months stand-by operation time when the device is powered by the full
capacity of AA alkaline batteries, and up to twelve months utilizing lithium
AA batteries. Once motion in the monitored area is detected, the digital
camera unit will be triggered at once (typically within one second) and then
automatically take photos or videos according to previously programmed
settings. The Trophy Cam HD Aggressor is equipped with built-in infrared
LEDs that function as a flash, so that it delivers clear photos or videos (in
black & white) even in the dark, and it can take color photos or videos under
sufficient daylight. The Trophy Cam HD Aggressor HD is designed for
outdoor use and is resistant against water and snow.
Your trail camera is one of the latest generation of Bushnell Trophy Cam HD
Aggressor HDs, and includes many new or improved features, including:
• Auto PIR Sensitivity-the camera monitors ambient temperature
conditions and automatically adjusts the sensor/trigger signal to be
more sensitive to slight variations in temperature on hot days, less
sensitive on cold days.
• Hyper NightVision-The IR LED Flash array now has increased range,
brighter output and better coverage for improved nighttime images.
Models 119776 & 119777 feature "No-Glow" Black LEDs, invisible to
game and other hunters.
• Field Scan 2x with Live Trigger-This "time lapse" feature includes the
option for a second block of recording with its own start/stop times.
Trigger signals generated by nearby wildlife activity will still generate
additional photos/videos as they normally would, independently of the
Field Scan operation.
• GPS Geotag Capability-allows the user to input the longitude and
latitude of the camera's position, which will be embedded in each
5