Canceling The Demonstration; Changing The Color System And Scanning Mode - JVC DX-T66 Manual De Instrucciones

Preparing the remote control
R6(SUM-3)/AA(15F)
• Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
DO NOT recharge, short, disassemble, heat
the battery or dispose of it in a fire.

Canceling the Demonstration

2
sec.
DEMO OFF
DEMO START
To start the demonstration, select DEMO START.
When using the remote
control, point the top of the
remote control toward the
remote sensor as directly as
possible. If you operate it
from a diagonal position,
the operating range (approx.
5 m) may be shorter.
Main Unit
ONLY
Changing the Color System and
Remote
Scanning Mode
ONLY
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the
COMPONENT jacks, you can enjoy a high quality picture
from the built-in DVD player by selecting progressive
scanning mode.
• You can change the setting only while the disc playback is
stopped.
1
Enter the color system setting mode.
2
sec.
SCAN MODE
VFP
2
Select the color system and scanning mode.
L – BALANCE – R
NTSC
PAL PROG
NTSC / PAL NTSC or PAL Interlaced scanning.
For a conventional PAL or NTSC TV.
NTSC / PAL NTSC or PAL Progressive scanning.
PROG
For a progressive NTSC or PAL TV.
3
Store the setting.
SET
INFO
PAL
NTSC PROG
6