Connecting The Am Antenna - JVC UX-V10 Manual De Instrucciones

CAUTION: Make all connections before plugging the System into an AC power outlet.
Connecting the FM Antenna
Rear Panel of the Unit
For
Hong Kong
only
OPTICAL
DIGITAL OUT

Connecting the AM Antenna

Rear Panel of the Unit
For
Hong Kong
only
OPTICAL
DIGITAL OUT
CAUTION:
To avoid noise, keep antennas away from the
System, the connecting cord and the AC power
cord.
EN01-09.UX-V10[U]
R
L
R
SPEAKERS
IMPEDANCE
MIN 4Ω
VOLTAGE SELECTOR
230V 110V
AC IN
127V
R
L
R
SPEAKERS
IMPEDANCE
MIN 4Ω
VOLTAGE SELECTOR
230V 110V AC IN
127V
3
Using the supplied Wire Antenna
L
Using the coaxial type connector
(not supplied)
A 75 Ω antenna with coaxial type connector (IEC or DIN 45325)
should be connected to the FM (75 Ω) COAXIAL terminal.
If reception is poor, connect the outdoor antenna.
Note: Before attaching a 75 Ω coaxial lead (the kind with a
round wire going to an outdoor antenna), disconnect the
supplied FM Wire Antenna.
AM Loop Antenna (supplied)
L
Attach the AM loop to its base by snapping the tabs on the loop
into the slot in the base.
ANTENNA
AM EXT
AM LOOP
FM (75Ω)
COAXIAL
Turn the loop until you have the best reception.
00.4.19, 10:45 AM
FM Wire Antenna
(supplied)
FM outdoor antenna
(not supplied)
Coaxial cable
3