Connecting Other Equipment; Canceling The Display Demonstration - JVC MX-GA8 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting Other Equipment

You can connect audio equipment—used only as a playback
device.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
To audio output
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX IN jacks by using audio cords (not
supplied).
AUX IN
Audio equipment
NOW you are ready to plug in the unit and
other connected equipment.

Canceling the Display Demonstration

When connecting the AC power cord into a wall outlet, the
unit automatically starts the display demonstration.
On the unit ONLY:
To cancel the display demonstration,
press CANCEL/DEMO while the display
demonstration is shown on the display.
When you press other buttons
The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it.
To start the display demonstration manually
Press and hold CANCEL/DEMO again for
more than 2 seconds.
CANCEL
/ DEMO
CANCEL
/ DEMO
8

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Sp-mxga8Ca-mxga8

Tabla de contenido