Presetting Radio Stations; Listening To The Preset Radio Stations - Sony HCD-T1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Presetting Radio
Stations
You can store radio frequencies in the
tuner's memory to tune in your favourite
stations quickly. You can preset up to 20
FM stations, 10 MW stations and 10 LW
stations in any order. For German and
Italian models, you can preset up to 20 FM
stations and 10 AM stations.
Use the buttons on the remote to do this
operation.
Tuner CD Player
POWER → ON
1
2
1
Press BAND repeatedly until the
desired band appears in the display.
German, Italian and gold colour models:
FM Bb AM
Other models:
b FM b MW b LW
2
Press TUNING/PLAY MODE
repeatedly until "MANUAL" or
"AUTO" appears in the display.
3
Press TUNING +/– to tune in the
station you want to store.
4
Press MEMORY.
"MEMORY" and the preset channel
number appear in the display.
5
Decide on a preset channel number for
the radio station (1 to 20 for FM, 1 to 10
for AM, MW and LW). Press TUNING
+/– to display the preset channel
number you have decided on.
6
Press ENTER.
The station is stored at the preset
channel number you have decided on.
7
Repeat steps 3 to 6 for each station you
want to store.
To erase a stored station
Store a new station on the preset channel
number of the station you want to erase.
This will erase the old station and replace it
with the new station.
Note
The preset stations will not be erased unless
you store a new station to replace the old ones
even if you disconnect the power source.
Liteninig to the
Preset Radio Stations
Once you have preset the stations, you can
quickly tune in your favourite stations.
Tuner CD Player
POWER → ON
3,5
6
4
1
1
Press BAND repeatedly until the
desired band appears in the display.
For German, Italian and gold colour
models:
FM Bb AM
For other models:
b FM b MW b LW
2
Press TUNING/PLAY MODE
repeatedly until "PRESET" appears in
the display.
3
Press TUNING +/– to tune in a preset
station.
The preset channel number appears,
then the station frequency appears and
the broadcast can be heard.
4
Press VOL +/– to adjust volume.
To change the frequency display to
the preset channel display
During listening to a preset radio station,
press DISPLAY on the remote. Each time
you press DISPLAY, the frequency or the
preset channel number appears in the
display.
3
1
4
3
2
4
GB
11
Chapter 3: the Radio

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tc-tx1Sa-n1Sa-n11

Tabla de contenido