Senco DuraSpin DS300-AC Instrucciones De Operación página 16

TECHNICAL
SPECIFICATIONS
DS300-AC
Voltage 120V
Current 5.2 amps
Frequency 60Hz
RPM 3300
Weight 8.7 lbs.
Height 6 "
7/8
Length 31 1/2 "-41 1/2
Width 4"
Fastener
50 screws
Capacity
(one strip)
Fastener 1 -3"
1/4
Range #6 thru #9
thd.
TOOL AND PARTS WARRANTY:
The length of this guarantee is one year from date of purchase by the original retail purchaser.
During this period, SENCO Products, Inc., will repair or replace at Senco's option, any original part or parts
for the original retail purchaser. This will be done free of charge, provided the parts are determined de-
fective in materials or workmanship upon examination by a SENCO Authorized Warranty Service Center
(exception: rubber o-rings, seals and bits). Any replacement part provided will carry a warranty for the bal-
ance of the period of warranty applicable to the part it replaces.
This warranty will be honored, only if:
A) No evidence of abuse, or failure to follow recommended operational maintenance, or modification of the
tool is present
(read Operator Manual for use and maintenance instructions);
B) When repair or replacement of parts or tools is necessary, the original retail purchaser returns the
complete tool or part, with transportation prepaid, to the nearest SENCO Authorized Warranty Service
Center, with purchase receipt or other positive proof that the part or tool is within the warranty period.
THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER WARRANTIES,
WHETHER ORAL, WRITTEN, EXPRESS, OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
EXCLUDED. BUYER'S OR USER'S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE.
SENCO PRODUCTS, INC. SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, OR SPECIAL DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CON-
TRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL SENCO'S LIABILITY
EXCEED THE PRICE OF THE TOOL WHICH HAS GIVEN RISE TO THE CLAIM
OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS TOOL SHALL TERMINATE
UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.
Replacement of Tool Due to Natural Disaster
SENCO will also replace any tool destroyed by an Act of God such as flood,
earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim will be hon-
ored provided that such original retail purchaser had previously submitted a completed warranty registra-
tion card, and then submits proof of ownership and an acceptable statement describing such Act of God
documented by an insurance carrier, police department, or other official governmental source. To obtain
instructions for filing a claim call 1-800-543-4596.
ESPECIFICACIONES
TECNICAS
DS300-AC
Voltaje
Current
Frequency
RPM
Peso (kg)
Alto (mm)
Largo (mm)
"
Profundidad
Capacidad
para tornillos
Gama de
tornillos
(1a 2 pulg)
SENCO TOOL & PARTS WARRANTY
This tool has been designed and constructed using
the highest standards of material and workmanship.
SENCO PRODUCTS, INC.
CINCINNATI, OHIO 45244-1611 USA
120V
5.2 amps
60Hz
3300
3.9
175
800-1054mm
102mm
50 tornillos
(una faja)
largos de 32 a75mm
cuerpo
de rosca #6 a#9
SPÉCIFICATIONS
TECHNIQUES
DS300-AC
Voltage 120V
Current 5.2 amps
Frequency 60Hz
TPM 3300
Poids (kg) 3.9
Hauteur 175
(mm)
800-1054mm
Longueur
(mm)
Larguer 102mm
Capacité
50 vis
fixarions
(une bande)
Longueurs 32 - 75mm
des de longueur
fixations corps fileté
#6 - #9