Switching-Off Servo Flash Mode - Metz mecablitz 52 AF-1 Manual De Instrucciones

Setting procedure for the learn function
The AF pre-flash function of the camera must
be switched off.
SYNC
M-SERVO
• Press the
Z
24 mm touch display as many times as it takes for
OOM
the selection to appear.
INFO P
SYNC
• Press the
display.
Learn
• "Learning Mode" is ready to learn.
• Press the release button on the camera so
that the camera's own flash unit is
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the
display as confirmation.
The macablitz 52 AF-1 digital has learned the
flash of the camera flash unit.
SYNC
sensor buttons on the
Learn
sensor button on the touch

10.4.5 Switching-off SERVO flash mode

SYNC
M-SERVO
• Press the displayed mode of operation on
the touch display as many times as it takes
Z
for the display for selecting the mode of
24 mm
OOM
operation to appear.
INFO 1/16
SLAVE
• Press the
SERVO
touch display and select the desired mode
of operation, e.g
TTL
• Press the sensor button on the touch display
for the mode of operation, e.g
M
The selected mode of operation is adopted.
sensor buttons on the
TTL
.
TTL
.
k
169