Switching-Off Servo Flash Mode - Metz 64 AF-1 digital Manual De Instrucciones

Setting procedure for the learn function
The AF pre-flash function of the camera must
be switched off.
SYNC
M-Servo
• Press the
touch display as many times as it takes for
M-
the selection to appear.
m
Zoom 24
m
P
1/16
• Press the
display.
O
SYNC
• "Learning Mode" is ready to learn.
• Press the release button on the camera so
that the camera's own flash unit is
LEARN
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the
display as confirmation.
The macablitz digital has learned the flash of
the camera flash unit.
SYNC
sensor buttons on the
Learn
sensor button on the touch

10.4.5 Switching-off SERVO flash mode

SYNC
M-Servo • Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
M-
operation to appear.
m
Zoom 24
m
P
1/16
O
MODE
• Press the
touch display and select the desired mode
of operation, e.g
TTL
A
• Press the sensor button on the touch
p
q
display for the mode of operation, e.g
TTL
The selected mode of operation is adopted.
0.6- 7.5 m
M-
5,6
m
24
F
Zoom
m
EV
sensor buttons on the
TTL
.
TTL
.
k
173