Publicidad
TOP COWLING
TOP COWLING
CHECKING THE WATER DRAIN HOLE
Check:
Water drain hole 1
Obstruction
CHECKING THE TOP COWLING FIT
1. Check:
Top cowling fit
Loose/unlatched
cowling fook.
2. Adjust:
Top cowling hook position
Adjusting steps:
(1)Loosen the bolt 1 approximately 1/4
of a turn.
(2)Move the top cowling hook 2 either
up or down slightly.
NOTE:
Moving the hook toward the seal will
loosen the top cowling.
Moving the hook away from the seal will
tighten the top cowling.
(3)Secure the bolt 1.
Top cowling hook bolt:
5 N
m (0.5 kgf
(4)Check the top cowling fitting and
repeat the adjustment necessary.
3-2
Clean.
Adjust the top
m, 3.7 ft
lb)
Publicidad
Capítulos
