Maintenance - EMAK Oleo-Mac BV 900 Manual De Instrucciones

8. MAINTENANCE

Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily work requires longer than normal
or harsh cutting conditions are present the suggested intervals should
be shortened accordingly.
Complete Machine
Controls (Ignition Switch, Choke
Lever, Throttle Trigger, Trigger
Interlock)
Fuel Tank and Oil Tank
Fuel Filter
All Accessible Screws and Nuts
(not Adjusting Screws)
Air Filter
Cylinder Fins and Starter System
Vents
Starter Rope
Carburetor
Spark Plug
Vibration Mounts
MAINTENANCE CHART
Inspect (Leaks, Cracks, and Wear)
Check Operation
Inspect (Leaks, Cracks, and Wear)
Inspect and Clean
Replace Filter Element
Inspect - Retighten
Clean
Replace
Clean
Inspect (Damage, and Wear)
Replace
Check Idle
Check Electrode Gap
Replace
Inspect (Damage and Wear)
X X
X X
X X
X
X
X
X
X
X
X
X
X X
X
X
X
GB
Every 6
Months
Every 6
Months
Every 6
Months
27