smartheart 01-572 Manual De Instrucciones página 19

MEMORY FUNCTION
5. When the number of readings exceeds 60 , the oldest data will be replaced
with the new record.
6. Press START STOP to turn the monitor off at any time during review of the
stored measurements.
Clearing Measurements From Memory
To delete a all results in a given bank:
1. When the monitor is off, press and release the
M button to access the memory bank feature.
2. Press and hold the M and S buttons at the same
time; the display will flash dEL and ALL, Fig 1.
3. Press the S button again to confirm you would
like to delete the memory bank, Fig 2; the
display will show dONE and turn off.
Note: To exit out of delete mode without
deleting any records, press START•STOP
button before pressing S button to confirm any
delete commands.
Fig. 1
Fig. 2
ENGLISH • 19