English
Working
Actuating the spray gun
Point the spray gun at the object to
N
be cleaned – never at persons!
Point the rotary nozzle downwards
N
when starting (if fitted)
2
1
Press the safety latch (2) downward
N
– the lever (1) is unlatched
Squeeze the lever (1)
N
The motor stops when the lever is
released.
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
38
High-pressure hose
NOTICE
Do not buckle or loop the high-pressure
hose.
Do not place any heavy objects on the
high-pressure hose, and do not drive
any vehicles over it.
Nozzles
1
+
Fan-jet nozzle (1)
The operating pressure can be infinitely
adjusted at the nozzle.
Jet angle 15°, maximum effect at a
distance of approx. 7 cm.
Turn nozzle sleeve
N
Rotary nozzle (2)
Nozzle with rotating jet for stubborn dirt
on hard surfaces. Maximum effect at a
distance of 10 cm.
The spray attachment can also be used
without nozzles at low pressure, e.g., for
rinsing with a large flow of water.
Storage compartment for nozzles
Open the flap – the rotary nozzle
N
and fan jet nozzle can be stored in
the holders
2
Storing accessories
Spray gun, spray lance, detergent bottle
and cleaning pin can be stored directly
on the machine – see "Main Parts".
RE 108, RE 118, RE 128 PLUS