Adding Detergent; Switching Off - Stihl RE 108 Manual De Instrucciones

Adding detergent

Detergent must not be allowed to dry on
the object to be cleaned.
Remove nozzle from spray lance –
N
see "Fitting, removing spray lance"
1
Install spray set (3) on spray
N
lance (1) – the spray set has an anti-
twist device; orient this according to
the groove on the spray lance
Fill the container of the spray set with
STIHL detergent diluted as directed
(approx. 0.5 liters).
RE 118 and 128 Plus only: Use the
N
adjusting ring (4) to set the quantity
of detergent to be added
When applying detergent, start at
N
the bottom and work upwards
Maximum effect at a distance of 1 m.
RE 108, RE 118, RE 128 PLUS

Switching Off

4
Turn the master switch to 0 and turn
N
off the water supply
3
Actuate the spray gun until water
N
only drips from the spray head (the
machine is now depressurized)
Release trigger
N
Press the safety latch upward – the
N
spray gun is locked to prevent
inadvertent operation
Unplug the power plug from the
N
socket
Disconnect hose from the water
N
supply and from the machine
After use
Rinse the connection latches of the
N
spray lance and nozzle with water
so that no deposits form
Roll the high-pressure hose and
N
power cable up on the holders
provided for this purpose – see
"Main Parts"
English
39