Preparing The Cables - Pioneer PDK-TS12 Manual De Instrucciones

Preparing the Cables

Use the enclosed cable binders to bind the cables.
Note
Be very careful not to apply force to the bases of the cables.
When installing the PDP-S38 or PDP-S37 speakers
When installing the PDP-S39 speaker
18
En
Using the cable binders
1
Insert the cable binder through the hole on
the top of the rotating platform of the
stand.
Cable binder
2
Gathering cables and placing them on the
cable binder.
3
Locking the cable binder.
Removing a cable binder
The lock is released by pushing
the part indicated by the arrow
in the figure.