smartheart 01-540 Manual De Instrucciones página 17

TAKING YOUR BLOOD PRESSURE READING
6. When the measurement is complete, your blood
pressure measurement and pulse will display
separately on the screen alternating repeatedly
every 2-3 seconds, Fig 4. The systolic and
diastolic readings will display at the same time.
7. The hypertension Indicator will indicate your
reading range in the right side of the display,
Fig 5. For more information see Interpreting
Your Results.
8. If an irregular heartbeat was detected during
the reading, the Irregular heartbeat Detector
icon will appear flashing on the display for
both the measurement results and pulse results
screens, Fig 6. For more information see
Interpreting Your Results.
9. The reading will automatically be stored in
memory, up to 60 readings.
10. Select START to turn the unit off and
conserve energy and battery life. The unit will
automatically shut-off and revert to time/date
mode after approximately 1 minute.
Systolic/Diastolic Results
Pulse Results
ENGLISH • 17
Fig. 4
Fig. 5
Fig. 6