Memory Function - smartheart 01-540 Manual De Instrucciones

MEMORY FUNCTIONS
Recalling Measurements in Memory
You can recall up to 60 total measurements in memory. These measurements can
be shared with your physician or trained healthcare professional.
1. Press and release the MEM button. The unit will
show how many measurements are stored within
the bank, Fig 1.
2. Press the MEM button again to scroll through the
saved measurements. Measurements will appear
on the display from most current to oldest.
All results for a given measurement will display,
including measurement results, pulse rate,
hypertension Indicator, Irregular heartbeat alert
(if applicable), and date/time stamp, Fig 2.
The measurement results and pulse results will
alternate, flashing between measurement and
pulse every 2-3 seconds.
3. When the number of readings exceeds 60, the
oldest data will be replaced with the new record.
4. Press START to turn the monitor oFF at any time
during review of the stored measurements..
20 • ENGLISH
MEM
MEM
Fig. 1
Fig. 2