Conformity Declaration - Sagola 4100xtreme Serie Manual De Instrucciones

20.

Conformity Declaration

In accordance with UNE-EN ISO/IEC 17050-1 (ISO/IEC 17050-1:2004)
Manufacturer: SAGOLA, S.A.
Address:
Hereby declares that the product: AEROGRAPHIC SPRAY GUN
Brand:
Range:
BATCH:
In accordance with the Esential Security Provisions on the Annex of the Directive 94/9/CE.
The product conforms with the standards:
• Directive of machines (2006/42/CE) and the corresponding transposition into national
law 1644/2008.
• EN 1953:2013
- Atomising and spraying equipment for coating materials. Security requirements.
• UNE-EN 12100:2012
- Safety of machinery. General principles for design. Risk assessment and risk reduction.
These also meets the following Regulations and Directives:
Non electrical equipment:
ATEX Directive (Directive 94/9/CE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking All static electricity is discharged through air pipes (the air hoses must be "STATIC-FREE")
UNE EN-13463-1:2011
- Non electrical equipment used for potentially explosive atmospheres.
Full technical documentation and service instructions are available.
In Vitoria-Gasteiz on 01/04/2016
Urartea, 6 01010 VITORIA-GASTEIZ (Alava) SPAIN
SAGOLA
4100 Xtreme
(See the back page of this Manual)
II 2G X
ENGLISH
Signed
Technical Manager
Enrique Sánchez Uriondo