Tips And Needles Kits; Kits Air Nozzle - Sagola 4100xtreme Serie Manual De Instrucciones

24/25

8. Tips and Needles Kits

SAGOLA S.A. supplies Nozzle Kits and Tip and Needle Kits of different
sizes for a variety of different applications. In order to replace these,
proceed as follows:
With the gun fully depressurised, remove the air nozzle.
Remove the product regulator with the spring and the spring stop and extract the needle to be
replaced. Remove the tip with the wrench supplied.
Fit the new tip and tighten. Now fit, in this order, the new needle, the spring and spring stop and
the product regulator. Lastly, fit the appropriate air nozzle.
There are Tip + needle Kits:
ø 0.80
ø 1.00
ø 1.20
ø 1.30
ø 1.40
ø 1.60
ø 1.80
ø 2.00
ø 2.20
ø 2.50
ø 2.80
ø 6.00
ø 1.20
ø 1.30
ø 1.40
ø 1.50
ø 1.80
ø 2.20
ø 2.50
ø 2.80
9. Air Nozzle Kits (Air consumption)
Gravity
Nozzle
20
62
62S
310 L/min. at 2 bar
64
64S
300 L/min. at 2 bar
67
78
96
96+
250 L/min. at 2 bar
765
777
3030
XT01
245 L/min. at 2 bar
XT01B
XT03
500 L/min. at 2 bar
SuperVIT
PD01
63C
Gravity Pressure
Pressure
470 L/min. at 2 bar
340 L/min. at 2.3 bar
310 L/min. at 2.3 bar
400 L/min. at 2.4 bar
410 L/min. at 2 bar
315 L/min. at 2 bar
345 L/min. at 2 bar
514 L/min. at 2 bar
300 L/min. at 2 bar
340 L/min. at 2 bar
460 L/min. at 2 bar
380 L/min. at 2 bar
ENGLISH
Suction Ceramic
Suction Ceramic
410 L/min. at 2 bar
340 L/min. at 2 bar
390 L/min. at 2 bar
310 L/min. at 2 bar
400 L/min. at 2 bar
410 L/min. at 2 bar
298 L/min. at 2 bar
300 L/min. at 2 bar
460 L/min. at 2 bar
450 L/min. at 2 bar
PD
PD
300 L/min. at 2 bar