Troubleshooting - IKRA IEVL 1532 Instrucciones De Manejo

12. TROUBLESHOOTING

WARNING! Only perform the steps described in
these instructions! All further inspection, main-
tenance and repair work must be performed by
a qualified specialist! Contact a specialist if the
problem cannot be solved by yourself!
WARNING! If the product does not perform prop-
erly, or sound are abnormal, or motor cannot be
started, or stopped as described, or the cutting
device does not work properly, or any other ir-
regularity, or malfunction occurs, do not attempt
to repair the product by yourself.
Please contact helpline or service center.
Before carrying out any maintenance opera-
tions, cut off the electric power supply by dis-
connecting the plug from the extension cable.
Fault
Motor does not run
Roller does not rotate
Motor output drops
Poor scarifying perfomance
Noisy running, application vibrates
Fault, which cannot be rectified with the help of this table, may only be attended to be an authorized company
(workshop).
GB | Operating Instructions
Cause
No voltage
Roller blocked
Toothed belt defective
Working depth too high
Dirty housing
Lawn too long for scarifying
Working depth too high
Worn blades
Balde damaged
GB-11
Remedy
Check connection line and connec-
tion protection switch
Check roller
Workshop
Selected lower working depth
Clean housing
Lawn too long for scarifying
Select lower working depth
Replace worn blade
Workshop