Adjust [Settings] Mode Settings; Listening To The Other External Components - Kenwood KDC-BT752HD Manual De Instrucciones

Reproductor de discos compactos receptor de fm/am
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjust [SETTINGS] mode settings

While listening to the radio...
Press the volume knob to enter [FUNCTION] mode.
1
Turn the volume knob to select [SETTINGS], then press to enter.
2
Turn the volume knob to make a selection, then press to confirm.
3
See table below for selection.
Hold
to finish the procedure.
4
Item
SEEK MODE
AUTO1 *: Automatically search for a station or channel. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is
not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 5)
RECEIVE MODE Sets the receive mode of the HD Radio receiver.
AUTO *: Automatically tunes to analog broadcast when there is no digital broadcast. ; DIGITAL: Tunes in to digital
broadcast only. ; ANALOG: Tunes in to analog broadcast only.
TAG MEMORY
Displays the tag memory usage of the HD Radio receiver.
00 — 50 (Preset: 00): Up to 50 tags can be registered to this unit.
Listening to the other external
components
Preparation : Make sure [ON] is selected for [BUILT-IN AUX]. (page 5)
SRC to select "AUX".
Press
1
Turn on the external component and
2
start playing.
Turn the volume knob to adjust the
3
volume.
Selectable setting (Preset: *)
TAG
VOICE
PAR
Portable audio device
(commercially available)
iPod
Auxiliary input jack
3.5 mm (1/8") stereo mini plug
(commercially available)
9
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kdc-x796

Tabla de contenido