Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000271-001.book Page 12 Wednesday, December 21, 2016 1:15 PM
en
12
Assembly instructions.
Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle (figure 2).
To loosen the clamping strap of the auxiliary handle, turn the handle counterclockwise.
Slide the strap of the auxiliary handle in the desired working position onto the collar until the
teeth engage into the recesses, and then tighten.
Fig. 2
2.
Auxiliary handle
3.
1.
4.
5.
3.
2.
1.
Publicidad
