Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000271-001.book Page 18 Wednesday, December 21, 2016 1:15 PM
en
18
Electronic torque shut-off (figure 11).
Adjust the torque only when the machine is at
a complete stop.
The motor switches off when reaching the set
torque and an audio signal sounds. After the
shut-off has taken place, release the on/off
switch and press it again for the next screw-
driving operation.
The audio signal can be switched on and off.
The electronic shut-off is deactivated when
working in the "
" torque level.
To achieve good working results, press the
power tool with sufficient force against the
screw.
The maximum speed is reduced in the lower
torque levels.
Fig. 11
On/Off switch
1.
2.
4.
6.
6.
3.
Battery
5.
5 sec.
Publicidad
