Angle And Lens Adjustment; Angle Adjustment; Vari-Focal Lens Adjustment - Ikegami ISD-A33S Instruction Manual

7.

Angle and Lens adjustment

7-1. Angle adjustment

Before doing this, the clear dome cover has to be
removed.
● Remove the dome cover
Turn the black section of the dome cover in a
counterclockwise direction to remove.
Pay attention not to drop a dome cover while doing
this.
Note: When imaging in a horizontal direction, the
black section of the dome cover may be imaged
so that part of the image is missing. Adjust the
angle of vision in a horizontal direction so that
the dome cover is not imaged.

7-2. Vari-focal lens adjustment

To re-direct lens, loosen the lens fixing screws for elevation.
Adjust the zoom knob for framing and angle, and a focus knob for
focusing.
Using those two knobs, adjust the lens to have desired framing, angle
and focal point. Repeat this procedure a couple of times, so that you may
achieve the best result.
Once the desired settings have been achieved, tighten the screws to fix
the position.
Zoom knob
Focus knob
E-7