Changing Tools; Operation; Select Operating Mode; Select Direction Of Rotation - Parkside PSBM 750 B3 Traducción Del Manual De Instrucciones Original

Changing tools

♦ Turn the quick­release chuck
RELEASE
to open it .
♦ Insert the desired tool into the quick­release
chuck .
♦ Turn the quick­release chuck
GRIP
to tighten the tool .

Operation

Select operating mode

Function selector switch
♦ Push the function selector switch
engages at the required symbol:
Function
Drilling
Impact drilling

Select direction of rotation

WARNING!
► The rotation direction switch
be used/adjusted if the appliance is at a
standstill .
♦ Select the direction of rotation by pressing the
rotation direction switch
right .

Preselecting the rotation speed

You can use the rotational speed preselector
adjusting wheel
speed . The speed you select depends on the
material to be processed . Work out the right
setting by carrying out a practice test .:
NOTE
► The appliance only reaches the set rotational
speed during continuous operation .
PSBM 750 B3
towards
towards
so that it
Symbol
may only
towards the left or
to preselect the rotational

Switching on and off

Switching the appliance on
♦ Press the ON/OFF switch
Switching the appliance off
♦ Release the ON/OFF switch
Switching to continuous operation
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation
♦ Press the ON/OFF switch
again .

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ Never permit liquids to penetrate inside the
appliance .
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■ Always clean the appliance after completion of
work .
■ Store the appliance in a dry place .
WARNING!
► If the connecting cable needs to be replaced,
order the replacement from the manufacturer
or an authorised representative in order to
avoid safety hazards .
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline .
.
.
. Lock it in the
and release it
GB │ MT │ 37 ■