Fagor LFA-019 IX Manual De Instruciones Y Mantenimiento página 5

English
2
PLUMBING IN
The dishwasher is
equipped with a high
3/8" Comp x 3/4" BSP
Closing valve
pressure water
Washer
connection pipe with a Water connection pipe
3/4 (1.905 cm) directional
internal pipe thread at
normal temperature and
pressure values (NPT).
In order to make its
installation easier, the
dishwasher includes a
3/8" (0.9525 cm) brass
Closing valve
3/4" NPT
compression part for 3/4
NPT which adapts the
Water connection pipe
pipe connector to a 3/8"
compression part which
incorporates the majority
of the valves which close
the water connection for
domestic dishwashers.
Alternatively, the pipe can
be coupled directly to a
male 3/4 brass NPT
connector which is
available in most
hardware stores.
Adjust the direction of the
pipe and the connection
which comes out of the
rear part of the appliance
following the installation
b1 b2
instructions.
WARNING
The hose has to pass
between the wall and the
bottom space at the back
of the dishwasher (b1),
so that it is not squashed
or too rigid (b2).
5