Service And Maintenance; Eu Declaration Of Conformity - Festool LRS 93 M Manual De Instrucciones

LRS 93
GB
In order to prevent damage to the pneumatic
motor, dust extraction must not be carried
out on the pneumatic tool when it is at stand-
still.
7

Service and maintenance

WARNING
Risk of injury

The machine should always be disconnected
from the compresses air supply before any work
is carried out on the machine.

All maintenance and repair work which requires
the motor casing to be opened may only be car-
ried out by an authorised service centre.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
EKAT Use only original Festool spare parts!
4
Order No. at:
5
3
2
1
7.1 Vanes
We recommend that the vanes on the motor be re-
placed after approx. 500 operating hours.
7.2 Lubrication
If the tool is not used for longer periods, e.g. for a
weekend, introduce 1 or 2 drops of lubricating oil
into the compressed-air supply [5-1] on the tool
prior to use.
7.3 Replacing the silencer
In order to maintain the power and performance of
the compressed air tool, replace the silencer on the
IAS hose systems at regular intervals.
7.4 Cleaning the extraction channels
We recommend that the extraction channels in the
tool [3] be cleaned using a small pipe-cleaner
brush or a cloth once a week (especially when
sanding resin filler). For this purpose release the
sanding base with the 4 screws.
8 Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine be-
16
cause these components are designed specifically
for the machine. Using accessories and consum-
able material from other suppliers will most likely
affect the quality of your working results and limit
any warranty claims. Machine wear or your own
personal workload may increase depending on the
application. Protect yourself and your machine, and
preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
Festool offers the appropriate sanding and polish-
ing attachments for every application.
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under " ".
9 Environment
Do not dispose of the device together with domes-
tic waste! Dispose of machines, accessories and
packaging at an environmentally responsible recy-
cling centre. Observe the valid national regulations.
Information on REACh:
10

EU Declaration of Conformity

Compressed air
sander
LRS 93 M
LRS 93 G
Year of CE mark: 2000
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following Directives, standards and normative
documents:
DIN EN ISO 11148-8 i.a.w. the provisions of 2006/
42/EC Directive.
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
orbital Serial no.
692049
692050