Maintenance And Care - Flex GE 7 Instrucciones De Funcionamiento Originales

Triangular sanding head
The triangular sanding head does not
rotate, but vibrates.
As the triangular sanding head can revolve
on bearings, it can sand right into the
corners of the wall/ceiling.

Maintenance and care

WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Cleaning
WARNING!
Do not use water or liquid detergents.
 Regularly blow out the housing interior
and motor with dry compressed air.
 Blow out the sanding head and gimbal
bearing with dry compressed air.
26
Replacing Velcro or backing pad
 Take hold of the sanding plate together
with the sanding head to prevent
the sanding plate from turning.
 Turn the bolts in anti-clockwise direction
and remove.
 The Velcro plates can be detached/
removed.
GE 7