Instructions For Use - Flex GE 7 Instrucciones De Funcionamiento Originales

Instructions for use

Before switching on the power tool
 Unpack power tool and accessories
and check that no parts are missing
or damaged.
Connecting the extractor
 Connect extraction hose to the 32 mm
connector.
NOTE
The connection piece of the GE 7 is a new
development.If electric power tools are used
with conventional connection pieces
together with the extraction hose of the
GE 7, an adapter from the FLEX
accessories programme can be used.
Attaching/changing the sanding
head
CAUTION!
Before performing any work on the electric
power tool, pull out the mains plug.
To attach:
 Press the two locks on the tool change
head (1.).
 Put the tool change head on the sanding
head (2.).
 Check that the locking mechanisms have
returned to the home position.
22
To change:
 Press the two locks on the tool change
head (1.) and remove sanding head (2.).
NOTE
The delta sander head and orbital sander
head are attached/changed in the same
way.
Using a dust extraction system
CAUTION!
When using the wall sander, connect
–
a Class M dust extractor.
If a dust bag is used which is not autho-
–
rised for use with dry construction dust,
the amount of dust particles in the air
may increase at the work place.
Over a prolonged period high concentra-
tions of dust in the air may damage
the human respiratory system.
GE 7