Troubleshooting - EINHELL TC-PG 1100 Manual De Instrucciones

9. Troubleshooting

Fault
Engine does not
start
Generator has too
little or no
voltage
Anl_SA_TC_PG_1100_SPK8.indb 17 Anl_SA_TC_PG_1100_SPK8.indb 17
GB
Possible cause
Automatic oil cut-out has not
responded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
- 17 -
Remedy
Check the oil level, top up with engine
oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
24.07.2017 08:05:58 24.07.2017 08:05:58