Maintenance; Replacing The Battery; Cleaning; Calibration - Chauvin Arnoux PAC 22 Manual De Instrucciones

For maintenance, only use specified spare parts. The manufacturer will not be held
responsible for any accident occurring after a repair made other than by its after sales
service or approved repair services.

5.1/ REPLACING THE BATTERY

- Completely disconnect the clamp from the circuit to be measured from your oscilloscope
- Unscrew the tool release screw holding the cover of the battery compartment.
- Replace the 9 V battery (type 6LF22, 6LR61 or NEDA 1604).
- Replace the cover of the battery compartment.

5.2/ CLEANING

Keep the jaw faces and mechanism perfectly clean.
The body of the clamp should be cleaned with a cloth moistened with soapy water.
Rinse with a cloth moistened with clean water.
Never expose the clamp to running water.

5.3/ CALIBRATION

It is essential that all test or measurement instruments are regularly calibrated.
For occasional daily use, we recommend that an annual calibration be carried out.
When the instrument is used continuously every day, we recommend that a calibration is
carried out every 6 months.
For calibration and repair of your instrument, please contact our COFRAC BNM accredited
laboratories:
- CHAUVIN ARNOUX Pont l'Evêque- France: (33) 31 64 51 11
- MANUMESURE Lyon - France:
Or the CHAUVIN ARNOUX subsidiary or Agent in your country

5.4/ REPAIR

Maintenance, repairs under or out of guarantee: Please return the product to your distributor.

5/ MAINTENANCE

(33) 78 26 68 04
22