Audio Induction Loops - signia Insio primax Manual De Instrucciones

Automatic program switch (AutoPhone or TwinPhone)
Your hearing instrument can automatically select the
telephone program when you bring the telephone handset
close to the hearing instrument. TwinPhone even transmits
the call into both ears. When you are finished speaking
on the phone, move the handset away from the hearing
instrument and microphone mode will re-engage.
If you want to use this function, ask your Hearing Care
Professional to do the following:
●
Activate the AutoPhone or the TwinPhone function.
●
Check the telephone receiver's magnetic field.
For the automatic program switch, your hearing
instrument detects the telephone receiver's magnetic
field. Not all telephones produce a magnetic field strong
enough to activate this function. In this case, you can
use the AutoPhone magnet, which is available as an
accessory, and attach it to the telephone receiver.
See the AutoPhone magnet user guide for instructions on
how to position the magnet.
NOTICE
Use the approved AutoPhone magnet only. Ask
your Hearing Care Professional for this accessory.
22

Audio induction loops

Some telephones and public places like theatres offer the
audio signal (music and speech) via an audio induction
loop. With this system, your hearing instruments can
directly receive the desired signal – without distracting
noise in the environment.
You can usually recognize audio induction
loop systems by certain signs.
Whether a telecoil is built into your hearing instrument
is listed in section "Settings". If a telecoil is built in, you
have the following options.
Ask your Hearing Care Professional to configure a
telecoil program.
Switch to the telecoil program whenever you are
X
in a place with an audio induction loop.
If a telecoil program is configured for your hearing
instruments, it is listed in section "Settings".
Telecoil program and remote control
NOTICE
For instruments with wireless connectivity:
When the telecoil program is active, the remote
control may cause a pulsing noise.
Use the remote control with a distance greater
X
than 10 cm (4 inches).
23