Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person is
recommended when assembling this
unit Take the unit out of its box and
make sure that all of the pieces are
there Fig.1:
(1) Main body; (7) Handlebar; (4)
Handlebar stem; (5) Saddle post; (6)
Horizontal saddle tube; (65) Saddle;
(3) Rear stabiliser bar with adjustable
feet; (2) Front stabiliser bar with
wheels; (33L) Left pedal; (33R) Right
pedal; (8) Slot head bolt M-10; (9) Flat
washer M-10; (10) Cap nut M-10. (86)
oil.
1. Position the machine's rear stand
on the rear stabilizer bar (3), as shown
in Fig.2, insert the bolts (8), fit the flat
washers (9) and cap nuts (10) and
then tighten securely.
2. Position the front stabiliser bar with
wheels (2), paying attention to the red
dots and with the wheels facing
forwards, as shown in Fig.2, insert the
bolts (8), fit the flat washers (9) and
cap nuts (10) and tighten securely.
3.- FITTING THE HANDLEBAR.-
Position the handlebar (7) on the
handlebar stem (4), Fig.3, tighten the
knob
(80)
and
handlebar stem (4) into the hole on the
main body (1), Fig.3. Position it
correctly and then tighten knob (47B)
by turning it clockwise.
ADJUSTING THE HANDLEBAR
HORIZONTALLY.-
Position the handlebar
comfortable
distance
exercise,
now
securely, Fig.3.
Stay within the references 0-6.
then
insert
(7)
at a
for
doing
tighten
knob
ADJUSTING THE HANDLEBAR
VERTICALLY.-
Position the handlebar
comfortable
exercise, now tighten knob (47B)
securely, Fig.3.
Stay
within
without
INSERT" mark.
4.- ATTACHING THE SADDLE.-
Fit the saddle bracket (65), Fig.4, onto
the horizontal saddle tube (6), as
shown in Fig.4, fit the saddle into
position and tighten the nuts on the
bracket securely.
Next insert the horizontal saddle tube
(6) through the hole on the saddle post
(5), Fig.4, position it correctly and
tighten the knob (47), Fig.4.
Insert the saddle post (5) into the boss
on the main body (1), position it
correctly and tighten the saddle post
by using the adjustment knob (47A),
Fig.4, turning it clockwise.
ADJUSTING THE SADDLE HEIGHT.-
Loosen the saddle post adjustment
knob (47A) slightly by turning it
anticlockwise, Fig.4, move the saddle
to a position comfortable for doing
exercise
the
adjustment knob (47A) securely by
turning it clockwise.
Stay within the references 0-19 without
going beyond the "MIN INSERT" mark.
HORIZONTAL
THE SADDLE.-
Loosen the knob (47) slightly by
turning it anticlockwise, Fig.4, move
the saddle to a position comfortable
(80)
for doing exercise and then tighten the
knob (47) securely by turning it
clockwise.
10
distance
the
references
going
beyond
and
then
ADJUSTMENT
(7)
at a
for
doing
0-14
the
"MIN
tighten
the
OF
Publicidad
