Characteristics; Reference Conditions - Chauvin Arnoux C.A 5231 Manual De Instrucciones

Each press of
this length ...
to change the measurement range
short
manually (span and resolution).
long
to return to Auto-range mode.
(> 2 sec)
Remark : the continuity test
not Auto-range;
3.2.3 The key
This key is used to hold the display of the measured value, and
to activate/deactivate the backlighting of the screen.
Each press of
this length ...
To
measured value ;
short
To exit from the
To
backlighting of the screen.
long
(> 2 sec)
Note : the backlighting is switched
off at the end of 10 seconds .

4. CHARACTERISTICS

4.1 REFERENCE CONDITIONS

Quantities of influence
Temperature :
Relative humidity:
Supply voltage :
English
... serves to
and diode test modes are
... serves to
hold the display of the
mode .
activate / deactivate the
Reference conditions
23 °C ± 2 ° C
45 % to 75 %
8,5 V ± 0,5 V
40 - 117