Slave Mode; Dmx Mode - Cameo F4 FC Manual De Usuario

SLAVE MODE

Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
to select the "Slave" menu item (as indicated by selector arrow on left) and confirm by pressing the encoder (ENTER). Slave mode is now
activated and the main display is automatically shown again. Connect the slave and master unit (same model, same software version) using
a DMX cable, and activate one of the stand-alone modes on the master unit. The slave unit will now follow the master unit.
currently activated mode
Press encoder =
select mode

DMX MODE

Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
to select the "DMX" menu item (as indicated by selector arrow on left) and confirm by pressing the encoder (ENTER). DMX mode is now
activated and the main display is automatically shown again. Select one of the ten available DMX modes in the menu item "DMX Mode" in
the main menu (see SET DMX MODE).
12
Fan mode
Press encoder =
Open main menu