Sharp MX-B350P Guia De Inicio Rapido página 11

MISFEED IN THE PAPER
TRAY 1
(1) Open the side cover and remove the misfed
paper (see step (1) of "Misfeed in the
transport area C (page8)").
(2) Lift and pull out the upper paper tray and
remove the misfed paper.
Be careful not to tear the misfed paper during removal.
(3) Push the upper paper tray in completely.
Push the tray in completely.
(4) Open and close the side cover.
The message " Clear paper path." will be cleared and
printing will be possible.
(2)
(1)
MISFEED IN THE PAPER
TRAY 2 (Option)
(1) Open the lower side cover.
Grasp the handle to open the lower side cover.
(2) Remove the misfed paper.
Be careful not to tear the misfed paper during removal.
(3) Close the lower side cover.
The message " Clear paper path." will be cleared and
printing will be possible.
(4) If the misfed paper is not seen in step 2, lift
and pull out the lower paper tray and
remove the misfed paper.
Be careful not to tear the misfed paper during removal.
(5) Close the lower paper tray.
Push the tray in completely.
If the message does not clear, check again to make sure
that no pieces of paper remain.
9