Sharp MX-B350P Guia De Inicio Rapido página 9

MISFEED REMOVAL
When a misfeed occurs during printing, the message
" Clear paper path." and the location of the misfeed will
appear.
Check the location and remove the misfeed.
For detailed procedures for removing the misfed paper, see the
User's Manual.
The paper may tear when you remove a misfeed. In
this event, be sure to remove all torn pieces of paper
from the machine.
BYPASS TRAY
(1) Remove any paper remaining in the bypass
tray.
(2) Gently remove the misfed paper from the
bypass tray.
(3) Grasp the side cover open/close handle,
and gently open and close the side cover.
(4) Turn the paper feed knob and feed out the
paper that is inside. (see "Misfeed in the
paper feed area A (page8)")
(5) Close the auxiliary tray and then the bypass
tray, grasp the side cover open/close
handle, and gently open and close the side
cover.
The message " Clear paper path." will be cleared and
printing will be possible.
MACHINE
To remove a misfeed from inside the machine, open the
side cover, check whether the misfeed occurred in "A",
"B", or "C" below, and follow the misfeed removal
procedure.
Area B
Area A
Area C
7