smartheart 01-542 Manual De Instrucciones página 19

MEMORY FUNCTIONS
cycle on the lower left—memory number, time, date, repeat, Fig 2.
4. When the number of readings exceeds 60, the oldest data will be
replaced with the new record.
5. Press POWER to turn the monitor off at any time during review of the
stored measurements.
Clearing Measurements From Memory
To delete all measurements from either memory
bank, follow these steps:
1. When the monitor is off, press and release
the MEM/SET button to access the memory
bank feature.
2. Press and hold the MEM/SET button for
3–4 seconds; the display will flash 'dEL ALL',
Fig 1.
3. Press MEM/SET to confirm; the display will
briefly flash 'dEL dONE' and turn off, Fig 2.
If you do not wish to delete the measurement
records, press the POWER button at any time to
exit the 'Clearing Measurement' mode.
Fig. 1
Fig. 2
ENGLISH • 19