Tig Welding; Tig Welding Procedures - Stel TIG μP 353H DC Manual De Instrucciones

TECHNICAL DESCRIPTION
2) T joint
The angle of inclination
electrode varies
to the passes made: the
of the electrode is
by swinging it and stopping at the sides of the seam so as to avoid the
accumulation of weld material in the centre of the weld.
- Removing slag:
For coated electrodes, it is necessary to remove the slag after each pass. The slag
is removed with a small hammer or, in the case of brittle slag, with a wire brush.
To make the different types of join correctly in the various positions, it is necessary
to practice under the guidance of an expert.
6.0– TIG WELDING
6.1- PROCEDURES AND TECHNICAL DATA FOR TIG WELDING
62
ENGLISH
TIG µP 353H DC
COD. 6903700030
of the
according
movement
performed
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
2) T joint
The angle of inclination
electrode varies
to the passes made: the
of the electrode is
by swinging it and stopping at the sides of the seam so as to avoid the
accumulation of weld material in the centre of the weld.
- Removing slag:
For coated electrodes, it is necessary to remove the slag after each pass. The slag
is removed with a small hammer or, in the case of brittle slag, with a wire brush.
To make the different types of join correctly in the various positions, it is necessary
to practice under the guidance of an expert.
6.0– TIG WELDING
6.1- PROCEDURES AND TECHNICAL DATA FOR TIG WELDING
62
ENGLISH
TIG µP 353H DC
COD. 6903700030
of the
according
movement
performed
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it