Preparing For Tig Welding - Stel TIG μP 203H-353H AC/DC Manual De Instrucciones

ENGLISH
TIG µP 203H-353H AC/DC
COD. 6902500070
4.9 PREPARING FOR TIG WELDING (FIG.7)
1) Follow the indications given above for primary connection and installation.
2) Connect the earth cable to the positive pole of the generator (ref.12 page 9).
3) Connect the torch coupling to the negative pole of the machine (ref.10 page 9).
4) Connect the torch button coupling to the connector provided (ref.11 page 9).
5) Connect the gas fitting to the socket provided (ref.9 page 9).
6) Connect the gas cylinder (Argon) to the coupling provided on the rear panel.
7) Regulate the cylinder pressure gauge for a flow rate of 4-6 I/min.
8) Proceed as indicated in the chapters on Tig welding( from page 27 to page 32)
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
57
ENGLISH
TIG µP 203H-353H AC/DC
COD. 6902500070
4.9 PREPARING FOR TIG WELDING (FIG.7)
1) Follow the indications given above for primary connection and installation.
2) Connect the earth cable to the positive pole of the generator (ref.12 page 9).
3) Connect the torch coupling to the negative pole of the machine (ref.10 page 9).
4) Connect the torch button coupling to the connector provided (ref.11 page 9).
5) Connect the gas fitting to the socket provided (ref.9 page 9).
6) Connect the gas cylinder (Argon) to the coupling provided on the rear panel.
7) Regulate the cylinder pressure gauge for a flow rate of 4-6 I/min.
8) Proceed as indicated in the chapters on Tig welding( from page 27 to page 32)
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
57